Roof Anchors for Fall Protection
Permanent anchors for fall protection are a simple and straightforward solution, typically used where access from inside a building is needed to carry out external work such as window cleaning or maintenance.
These systems are suitable for single users, trained to use a harness and lanyard and can be used in fall restraint and fall arrest.
Standard anchors are available in a variety materials, sizes and finishes and offer various sockets for installation to brickwork, concrete, steelwork, cavity walls and suspended ceilings.
Fall arrest systems will require rescue plans and rescue training. These systems must be inspected by a suitable working at height Specialist Company a minimum of every 12 months.
For more information regarding permanent roof anchors or temporary roof anchors, we will be happy to help. We’re always keen to discuss your requirements so please don’t hesitate to get in touch.
Get in touch! Call us on 0330 113 0870. Email us info@altussafety.co.uk or fill in the form below...
Got a question? Our team can tell you more about this solution.
You can fill in our contact form or contact us direct on 0330 113 0870 or info@altussafety.co.uk
Fixed anchors comply with the following standards:
Class A1 795
BS 7883
Testing/Inspection standards and frequency:
Class A1 Fall Protection systems under BS EN 795 and BS EN 7883 – a minimum of every 12 months.
Fixed anchors are available in a range of materials and finishes, Please see below:
Materials
Galvanised Steel
Stainless Steel
Finishes
Powder Coated to any RAL colour
Fixed anchors are suitable for installation into brickwork, concrete and steelwork, they are also available for installation in cavity walls, floors and suspended ceilings.
Fixed anchors are also known as:
fall arrest anchor, fixed eyebolts, window cleaning bolts
These systems are commonly installed in the following sectors:
Residential
Industrial
Offices
Retail
Hotels / Leisure
Education
Healthcare
Utilities
Users are to connect to anchors using a compliant safety lanyard and full body harness. The safety lanyard must incorporate an energy absorbing shock absorber and be no more than 2m long.
Available Materials & Finishes
Galvanised Steel
Stainless Steel
Powder Coated
