Companionway ladders come with durable anti slip treads and handrail to offer a more stable and secure form of access than caged access ladders.

These systems are Lightweight and are available freestanding or as a permanent fixture, making them quick & easy to install.

Companionway ladders can be integrated into guardrail systems to form part of a planned and comprehensive access strategy and are suitable for internal and external use where the rise is no greater than 3m.

This system requires only basic working at height training for use and must be inspected by a suitable working at height Specialist Company a minimum of every 12 months.

We’re always keen to discuss your requirements so please don’t hesitate to get in touch.

Key Benefits

Here’s a brief summary...

  • Durable anti slip treads and handrail offer a stable, secure form of access
  • Available freestanding or as a permanent fixture
  • Lightweight & durable
  • Companionway ladder systems can be integrated into guardrail systems
  • Quick & easy to install
  • Suitable for internal and external use where the rise is no greater than 3m

Got a question? Our team can tell you more about this solution.

You can fill in our contact form or contact us direct on 0330 113 0870 or info@altussafety.co.uk

Available Services

Find out more about our other services...

Survey & Risk Assessment

Design, Supply & Installation

Inspection, Testing & Maintenance

Training, Courses & Seminars

Additional Information

All you need to know about this solution...

The Work at Height regulations 2005 (WAHR 2005) require that whenever a roof or raised area that has to be accessed, this access must be undertaken in a safe and planned manner.

Whatever your access needs or problems, a vertical ladder can be designed to give you safe and secure access to any raised areas while complying with all Work at Height Directives.

Where design parameters permit, companionway ladders are more practical to use than vertical ladders. Companionway ladders comply with the following standards:

BS 5395: Part3. 1985

Testing/Inspection standards and frequency:
The Provision and Use of Work Equipment Regulations (P.U.W.E.R) 1998 – minimum of every 12 months by a working at height specialist company

Companionway ladders are available in a range of materials and finishes, Please see below:

Materials

Aluminium

GRP

Galvanised Steel

Stainless Steel

Finishes

Powder Coated to any RAL colour

Companionway ladders can be used on any good quality structure which is capable of withstanding the additional loading exerted by the system.

Did you know?

Companionway ladders are suitable for situations where the rise is less than 3 metres.

They are designed for use in the 65° to 75° range.

Twin low level handrails should extend above the top step to provide a safe handhold whilst accessing the upper level.

Companionway ladders should be fitted with a single line of handrail on each side and require a width between 450mm and 550mm.

The height of the handrail should range between 250mm for a ladder slope of 65° and 100mm for 75° slope.

The top tread should be at the same level as the adjacent floor, with a minimum tread width of 100mm, minimum rise of 225mm and maximum rise of 255mm.

Companionway ladders are also known as:

ships ladders

These systems are commonly installed in the following sectors:

Residential

Industrial

Offices

Retail

Hotels / Leisure

Education

Healthcare

Utilities

Available Materials & Finishes

altus shield

Aluminium

altus shield

GRP

altus shield

Galvanised Steel

altus shield

Stainless Steel

altus shield

Powder Coated

Got a question? Our team can tell you more about this solution.

You can fill in our contact form or contact us direct on 0330 113 0870 or info@altussafety.co.uk